CYLNUC is NSD smart linear position sensing cylinder that indicates the amount of linear travel and rod extension throughout the range of sensing stroke.
Model coding
CSA-[a]×[b]-[c][d]-C[e]-[f]
Standard model code:CSA-20×250-FA7-C2.0-A1
| Item | Code | Description | |||
|---|---|---|---|---|---|
| a | Bore size | 20 | Φ20 | Units : mm | |
| 40 | Φ40 | ||||
| b | Stroke length | 30 ～ 500 | Φ20 | 標準 : 30, 50, 60, 80, 100, 110, 150, 200, 230, 250, 300, 350, 400, 450, 500 | Units : mm |
| 30 ～ 700 | Φ40 | 標準 : 30, 50, 80, 100, 120, 150, 200, 250, 300, 350, 400, 500, 600, 700 | |||
| c | Mounting style | [FA]Flange on rod end side | |||
[LS]Foot on rod end side /parallel to axis  | |||||
[TB]Trunnion on head end side | |||||
[FB]Flange on head end side | |||||
[LB]Foot both ends /parallel to axis  | |||||
| d | Max. operating pressure | 7 | 0.7 MPa(7kgf/cm2) | ||
| 0 | Piston with hole | ||||
| e | nterconnecting sensor cable length | 2.0 | 2 m | ||
f | Option | A1 | Lock nut (accessory) | ||
| A2 | Clevis / single | ||||
| A3 | Clevis / double (supplied with a Pivot pin A4) | ||||
| A4 | Pivot pin (for Clevis) | ||||
| C4 | Bellows | ||||
System Configuration
Specification
Cylinder
| Item | Specification | ||
|---|---|---|---|
| Bore size | Φ20 | Φ40 | |
| Rod diameter(mm) | Φ10 | Φ14 | |
| Stroke(mm) | Without bellows | 30 ～ 500 | 30 ～ 700 |
| With bellows | |||
| Operating pressure range(MPa (kgf/cm2)) | 0.1 ～ 0.69(1 ～ 7) | ||
| Proof pressure(MPa (kgf/cm2)) | 1.03(10.5) | ||
| Operating fluid | Compressed air | ||
| Cylinder speed range(mm/s) | 50 ～ 500 | ||
| Ambient operating temperature(℃) | 5 ～ 60 | ||
Applicable sensor
| Item | Specification |
|---|---|
| Absolute detection range | 12.8 |
| Resolution(mm) | 0.00156 |
| Linearity error(mm) | 0.25 + L/2000 Max. L : Stroke |
| Protection rating | IP67(Conforms to JAM 1030 standard) |
| Vibration resistance | 2.0×102 m/s2 {20G} 200Hz up / down 4h, forward / back 2h, conforms to JIS D1601 standard |
| Shock resistance | 4.9×103 m/s2 {500G} 0.5ms up / down / forward / back×3 times each, conforms to JIS C5026 standard |
Dimensions
CSA-20×□-FA
CSA-40×□-FA
CSA-40×□-FB
CSA-40×□-LS
CSA-40×□-LB
CSA-40×□-TB
Model coding
SBA- [a]×[b]-[c][d]-[e][f][g]J[g][h] *1
Standard model code:SBA-50×250-FA9.9-BT0J0A1
| Item | Code | Description | ||
|---|---|---|---|---|
| a | Bore size(mm) | 40 | Φ40 | |
| 50 | Φ50 | |||
| 63 | Φ63 | |||
| 80 | Φ80 | |||
| 100 | Φ100 | |||
| b | Stroke length(mm) | 50 ～ 1000 | Φ40 | 10 mm units is possible. |
| 50 ～ 1000 | Φ50 | |||
| 50 ～ 1400 | Φ63 | |||
| 50 ～ 1600 | Φ80 | With bellows : 50～1400 | ||
| 50 ～ 1800 | Φ100 | With bellows : 50～1500 | ||
| c | Mounting style | [00]Basic type | ||
[LB] Foot both ends / parallel to axis | ||||
[FA]Flange on rod end side | ||||
[FB]Flange on head end side | ||||
[CA]Clevis / single | ||||
[CB]Clevis / double | ||||
[TA]Trunnion on rod end side | ||||
[TC]Intermediate fixed trunnion | ||||
| d | Max. operating pressure | 9.9 | 0.97 MPa(9.9kgf/cm2) | |
| 0 | Piston with hole | |||
| e | Cushion | B | Both ends of cylinder | |
| N | Non | |||
| f | ポート形式 | T | Rc | |
| N | NPT(Order) | |||
| g | f (port), J (sensor connector) mounting location as viewed from rod end | ![[0] : Up,[1] : Right,[2] : Down,[3] : Left](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_sgg8AidCg_pDBVgdljjtY3ebdTmL4TdX3UOz6aIVXmvwLByVLBVEV_jGvDWSfWa0rL-GGpmGY0Fvni5uglArOqYW5wUioQByaEF0aIxIDrXY_zxvJHCnwDAZD3GxikRh6uetbFSt1uGDk_BVfW=s0-d) | Please contact your NSD representative when attached cable type is required. | |
h | Option | A1 | Lock nut (accessory) | |
| A2 | Clevis / single | |||
| A3 | Clevis / double (supplied with a Pivot pin A4) | |||
| A4 | Pivot pin (for Clevis) | |||
| B1 | Bracket / single (supplied with a pivot pin B3) | |||
| B2 | Bracket / double (supplied with a pivot pin B3) | |||
| B3 | Pivot pin (for bracket) | |||
| C2 | Bellows (Neoprene) | |||
*1 : "J" shows that the sensor terminal shape is a connector.
System Configuration
Specification
Cylinder
| Item | Specification | ||||||
|---|---|---|---|---|---|---|---|
| Bore size | Φ40 | Φ50 | Φ63 | Φ80 | Φ100 | ||
| Rod diameter(mm) | Φ18 | Φ20 | Φ22.4 | Φ28 | Φ36 | ||
| Stroke(mm) | Without bellows | 50 ～ 1000 | 50 ～ 1400 | 50 ～ 1600 | 50 ～ 1800 | ||
| With bellows | 50 ～ 1400 | 50 ～ 1500 | |||||
| Operating pressure range(MPa (kgf/cm2)) | 0.2 ～ 0.97(2 ～ 9.9) | ||||||
| Proof pressure(MPa (kgf/cm2)) | 1.5(15) | ||||||
| Operating fluid | Compressed air | ||||||
| Cylinder speed range(mm/s) | 50 ～ 500 | ||||||
| Ambient operating temperature(℃) | 5 ～ 60 | ||||||
Applicable sensor
| Item | Specification |
|---|---|
| Absolute detection range | 12.8 |
| Resolution(mm) | 0.00156 |
| Linearity error(mm) | 0.25 + L/1000 Max. L : Stroke |
| Protection rating | IP40 (Conforms to JAM 1030 standard) |
| Vibration resistance | 2.0×102 m/s2 {20G} 200Hz up / down 4h, forward / back 2h, conforms to JIS D1601 standard |
| Shock resistance | 4.9×103 m/s2 {500G} 0.5ms up / down / forward / back×3 times each, conforms to JIS C5026 standard |
STC Việt Nam_công ty XNK hàng đầu và là Nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng xu huớng công nghiệp hóa, hiện đại hóa. Ứng dụng công nghệ cao vào tự động hoá trong quản lý và sản xuất nhằm tối ưu hoá hiệu quả kinh doanh
0 nhận xét:
Đăng nhận xét